Load data for .30 PICRA + .308 | 175gr | Nosler Custom Competition

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 175gr \| Nosler Custom Competition
Manufacturer SKU:	53952
Bullet Weight:	175gr \| 11.3g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.250" \| 31.7mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.369" \| 9.4mm
Shank Seated Depth:	0.212" \| 5.4mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4105_C311
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 46 loads in caliber .30 PICRA with .308 | 175gr | Nosler Custom Competition bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	34911	86%	**38	100%
Accurate 4100	<<locked>>	73%	35853	88%	**34	93%
[Accurate No. 11 FS]*	<<locked>>	82%	36245	89%	**50	86%
Accurate No. 9	<<locked>>	62%	35984	89%	**17	97%
Accurate TCM	<<locked>>	62%	35810	88%	**17	98%
Alliant 2400	<<locked>>	69%	34737	86%	**27	95%
Alliant BLUE DOT	<<locked>>	72%	35752	88%	**04	99%
Hodgdon H110	<<locked>>	78%	36521	90%	**70	90%
Hodgdon LilGun	<<locked>>	79%	36027	89%	**96	96%
Hodgdon TrailBoss	<<locked>>	94%	24700	61%	**3	100%
Maxam CSB 1	<<locked>>	65%	36187	89%	**17	100%
Ramshot Enforcer	<<locked>>	70%	36376	90%	**50	97%
ReloadSwiss RS 14	<<locked>>	92%	23337	57%	**3	100%
ReloadSwiss RS 30	<<locked>>	93%	34693	85%	**73	92%
SNPE Vectan A0	<<locked>>	64%	36129	89%	**50	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	35766	88%	**37	98%
SNPE Vectan BA7 1/2	<<locked>>	66%	35157	87%	**96	100%
[Somchem S265]*	<<locked>>	85%	35752	88%	**14	88%
Vihtavuori 3N38	<<locked>>	68%	34592	85%	**68	100%
Vihtavuori N105	<<locked>>	70%	34258	84%	**78	100%
Vihtavuori N110	<<locked>>	87%	35650	88%	**53	96%
Vihtavuori N32C Tin Star	<<locked>>	77%	34635	85%	**9	100%
[Winchester 296]*	<<locked>>	77%	34693	85%	**70	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26165	64%	**20	100%
[Accurate 4100]*	<<locked>>	61%	23496	58%	**40	85%
[Accurate No. 11 FS]*	<<locked>>	73%	26774	66%	**15	80%
Accurate No. 9	<<locked>>	61%	33794	83%	**91	97%
Accurate TCM	<<locked>>	61%	33620	83%	**81	97%
Alliant 2400	<<locked>>	61%	27050	67%	**02	91%
Alliant BLUE DOT	<<locked>>	61%	25599	63%	**53	96%
[Hodgdon H110]*	<<locked>>	63%	21872	54%	**33	80%
[Hodgdon LilGun]*	<<locked>>	61%	19203	47%	**07	85%
Hodgdon TrailBoss	<<locked>>	67%	15258	38%	**2	100%
Maxam CSB 1	<<locked>>	61%	33373	82%	**8	100%
Ramshot Enforcer	<<locked>>	61%	26687	66%	**06	92%
ReloadSwiss RS 14	<<locked>>	60%	13024	32%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	74%	20508	51%	**14	81%
SNPE Vectan A0	<<locked>>	61%	33431	82%	**24	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14083	35%	**0	82%
SNPE Vectan BA7 1/2	<<locked>>	61%	30429	75%	**43	100%
[Somchem S265]*	<<locked>>	69%	22974	57%	**10	80%
Vihtavuori 3N38	<<locked>>	61%	28065	69%	**79	100%
Vihtavuori N105	<<locked>>	61%	25222	62%	**56	100%
[Vihtavuori N110]*	<<locked>>	61%	16114	40%	**9	82%
Vihtavuori N32C Tin Star	<<locked>>	62%	25150	62%	**4	100%
[Winchester 296]*	<<locked>>	70%	27731	68%	**55	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data